is moving to

Cisco Codec Kit for OneLINK HDMI to Cisco Cameras

Contact a Vaddio Representative
Key Features
  • Simple, clutter-free camera extension with HDBaseT technology
  • Power, control, and video up to 328ft (100m) over a single Cat-5e/6 cable
Other Views
  • Cisco Codec Kit for OneLINK HDMI to Cisco Cameras
999-9560-000 (North America), 999-9560-001 (Europe/UK), 999-9560-009 (Australia/New Zealand)

For Cisco Telepresence SX20, SX80 or C-Series codecs with Cisco Precision series cameras

More Flexibility for Room Design and Installation
Tailored for Cisco codec systems and compatible with most Cisco Precision series cameras, this OneLINK codec kit provides more freedom of choice for camera selection and equipment placement.


  • More flexibility in camera and/or codec placement – no longer dependent on the location of the codec
  • HDBaseT interface extends power, video and control up to 328 feet/100 meters – Cisco systems can now go into larger rooms
  • Plug and play usability
  • Intuitive browser-based user interface for configuration and system administration

Please note:

When connecting a Cisco Precision 40 or PrecisionHD 1080p2.5x camera to a OneLINK HDMI, you will need to provide a Cisco CAB-PHD4XS2-SPLIT cable. When connecting a Cisco SX20 codec to a OneLINK HDMI, you will need to provide the same Cisco CAB-PHD4XS2-SPLIT cable.
This Package Includes:
  • OneLINK HDMI Interface
  • OneLINK HDMI EZIM with mounting screws
  • Thin Profile Wall Mount (black) with mounting hardware
  • Quick-Start Guide
  • 48V power supply with AC cord set(s)
  • 1' (0.3m) cat-5 cable, black
  • 3' (0.9m) cat-5 cable, black
  • 1' (0.3m) directional cat-5 cable for Cisco PrecisionHD*
  • 3' (0.3m) directional cat-5 cable for Cisco SX20**
  • 1' (0.3m) HDMI cable
  • 3' (0.9m) HDMI cable
  • 1' (0.3m) EIAJ-04 to 5.5x2.1 power cable for camera
  • EZCamera RS-232 Control Adapter
  • EZCamera RS-232 Control Adapter 998-1002-232 for Cisco codec serial 9-pin ports

* If connecting to a Cisco PrecisionHD 4xS2 camera, a user-supplied Cisco CAB-HDMI-PHD4XS2-SPLIT cable is required
** If connecting to a Cisco SX20 codec, a user-supplied Cisco CAB-PHD4XS2-SPLIT cable is required

Accessories & Peripherals Compatible with Cisco Codec Kit for OneLINK HDMI to Cisco Cameras